菌落計數器概述

     J-2出口型菌落計數器是一種數字顯示式半自動細菌檢驗儀器。由計數器、探筆、計數池等部分組成。計數器采用CMOS集成電路設計制造。黑色縱深背景式記數池內，采用節能環形熒光燈側射照明，菌落對比清楚。按照細菌計數檢驗規程規定，儀器顯示器設計為三位數，當一只培養皿中菌落生長數超過300個時，應將檢驗樣品稀釋重作，以保證計數的準確性。本儀器可減輕實驗人員的勞動強度,提高工效和工作質量。產品廣泛用于食品、飲料、藥品、生物制品、衛生用品、飲用水、工業廢水、臨床標本中細菌數的檢驗。是各級衛生防疫站、環境監測站、食品衛生監督檢驗所、醫院、生物制品所、藥檢所、食品廠、日化廠及大專院校、科研單位實驗室的*儀器。

主要參數

·計數器容量：0～999

·光源燈功率：16W

·總功耗：＜20W

·電源電壓：220V±10％，50Hz

·體積：268×225×90

·重量：1.5kg

使用方法

　　a. 接通電源，撥動開關計數池內燈亮，顯示屏顯示“001”， 將探筆插頭插入儀器的插孔內，按下“復位”鍵調零使儀器進入工作狀態。

b. 放入待檢培養皿。

c. 用探筆在培養皿底面對所有的菌落逐個點數。此時，菌落處被標上顏色，蜂鳴器發生鳴叫，表示計數有效。顯示屏內數字自動累加。

d. 用放大鏡仔細檢查，確認點數無遺漏，計數即已完畢。（如有遺漏，可用“手動” 計數按鍵補計。）

e. 顯示屏內的數字即為該培養皿的菌落數。

f. 記錄數字后取出培養皿。按“復位”鍵，顯示屏進入初始狀態。

注意事項

1. 儀器應放置在平整牢固的臺面上使用。

　　b. 點數菌落時，探筆不要過于傾斜,輕輕點下至有彈跳感時，數字即被輸入。

　　c. 儀器應防潮、防劇烈震動、防直接日光曝曬、防酸堿侵蝕,用后應加防塵罩。

d. 注意防止細菌培養物污染計數池。

 e. 儀器及探筆均不能隨意拆卸。若發現故障，應請有經驗的技術人員檢修。

General Description

This Colony Meter is a semi-automatic digital displayer for counting the germs, which consists of counter, sensor, counting cell etc. The counter is made of CMOS integrated electric. In the black longitudinal background counting cell, a circular fluorescent lamp is used for side lighting, which can give a clear colony comparing. The monitor is designed as three-figure number according to the requirement for bacterial counting SOP. When the colony in one culture plate is over 300, dilute the sample and redo the operation in order to ensure the accuracy of the counting. This instrument can reduce the labour of the operator, enhance the efficiency and working quality, which can be widely used in the field of foodstuff, beverage, drugs, biological products, sanitary utilities, drinking water, industrial waste water and clinical sample. It is a necessary instrument for all levels of health and epidemic prevention stations, environmental monitoring stations, food sanitary supervision organizations, hospitals, biological products manufacturers, medicine inspection stations, foodstuff companies, chemical industry, institutions, and research centres.

1. Main Data

Capacity of the Counter: 0~999

Power consumption of lamp: 16w

Total power consumption: <20w

Voltage : 220v±10% , 50Hz

Volume: 268×225×90 mm

Weight: 1.5kg

2.Instructions

1、Connect the power, open the lamp in the counting cell when the monitor shows“001”, insert the sensor and push the “reset” key.

2、Put the sample into culture plate.

3、Count the colony in the plate with the sensor one by one. At this time, the colony is coloured and buzzer sounds which means the counting is ok. On the monitor, the numbers are added automatically.

Check with magnifier to ensure the counting is correct.(if some is lost, use the “check” key to add it to.)

4、The last number in the monitor is the colony in the plate.

5、After the operation, please take out the culture plate. Push the “reset” key and the monitor return to original state.

3.Notice

1  The instrument should be put on a fixed and stable operation table with smooth face.

2  When counting the colony, the sensor should not be over leaned. With a slight touch to a sense of elastic, the number is input.

1. Far from the humidity, severe shock, strong sunshine, acids and alkali. A dust cover is necessary.
   1. Prevent the culture media from contaminating the counting cell. 
   2. The instrument and the sensor should not be dismantled at random. If the trouble occurs, please ask the experienced technician for repairing.