您好, 歡迎來到化工儀器網
6SL3210-5FE13-5UA0V90輸入電壓380 V3A變頻器
6SL3210-5FE13-5UA0V90輸入電壓380 V3A變頻器
6SL3210-5FE13-5UA0
相似圖像 SINAMICS V90 輸入電壓：380-480 V 3 A - 15 %/+ 10 % 13.8 A 45-66 Hz 輸出電壓：0 – 輸出 11.0 A 0-330 Hz 電機：3.5 kW 防護等級：IP20 尺寸 C， 140x260x240（寬x高x深）
更多圖片
| | 您可選擇將選項加入到此產品。 配置產品選項 其它文件 建議同時購買：   6SL3210-5FE15-0UA0SINAMICS V90 輸入電壓：380-480 V 3 A - 15 %/+ 10 % 15.8 A 45-66 Hz 輸出電壓：0 – 輸出 12.6 A 0-330 Hz 電機：5.0 kW 防護等級：IP20 結構尺寸 C140x 260x 240（寬x高x深）  6SL3210-5FE13-5UF0SINAMICS V90，含 PROFINET 輸入電壓：380-480 V 3 A - 15 %/+ 10 % 13.8 A 45-66 Hz 輸出電壓：0 – 輸出 11.0 A 0-330 Hz 電機：3.5 kW 防護等級：IP20 尺寸 C， 140x260x240（寬x高x深） 6SL3210-5FE15-0UF0SINAMICS V90，含 PROFINET 輸入電壓：380-480 V 3 A - 15 %/+ 10 % 15.8 A 45-66 Hz 輸出電壓：0 – 輸出 12.6 A 0-330 Hz 電機：5.0 kW 防護等級：IP20 結構尺寸 C140x 260x 240（寬x高x深）  1FL6032-2AF21-1AA1SIMOTICS S-1FL6 工作電壓 230 V 三相交流 PN=0.2 kW；NN=3000 U/min M0=0.64 Nm；MN=0.64 Nm； 軸高度 30 mm 增量編碼器 TTL 2500 增量/轉 帶滑鍵 公差 N 無駐車制動器 防護等級 IP65 帶密封圈 與變頻器兼容 SINAMICS V90  1FL6024-2AF21-1AA1SIMOTICS S-1FL6 工作電壓 230 V 三相交流 PN=0.1 kW；NN=3000 U/min M0=0.32 Nm；MN=0.32 Nm 軸高度 20 mm 增量編碼器 TTL 2500 增量/轉 帶滑鍵 公差 N 無駐車制動器 防護等級 IP65 帶密封圈 與變頻器兼容 SINAMICS V90 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
6SL3210-5FE13-5UA0V90輸入電壓380 V3A變頻器
| 6SL3210-5FB10-1UA2 SINAMICS V90， 輸入電壓： 200-240 V 1 相/三相交流 - 15 %/+ 10 % 2.5 A/1.5 A 45-66 輸出電壓：0 – 輸出 1.2 A 0-330 Hz 電機：0.1 kW 防護方式：IP20 尺寸 A， 45x170x170（寬x高x深） |
| |||||
| 6SL3210-5FB10-1UF2 SINAMICS V90，帶 PROFINET 輸入電壓： 200-240 V 1 相/三相交流 - 15 %/+ 10 % 2.5 A/1.5 A 45-66 輸出電壓：0 – 輸出 1.2 A 0-330 Hz 電機：0.1 kW 防護方式：IP20 尺寸 A， 45x170x170（寬x高x深） |
| |||||
| 6SL3210-5FB10-2UA2 SINAMICS V90， 輸入電壓： 200-240 V 1 相/三相交流 - 15 %/+ 10 % 3.0 A/1.8 A 45-66 輸出電壓：0 – 輸出 1.4 A 0-330 Hz 電機：0.2 kW 防護方式：IP20 尺寸 A， 45x170x170（寬x高x深） |
| |||||
| 6SL3210-5FB10-2UF2 SINAMICS V90，帶 PROFINET 輸入電壓： 200-240 V 1 相/三相交流 - 15 %/+ 10 % 3.0 A/1.8 A 45-66 輸出電壓：0 – 輸出 1.4 A 0-330 Hz 電機：0.2 kW 防護方式：IP20 尺寸 A， 45x170x170（寬x高x深） |
| |||||
 | 6SL3210-5FB10-4UA1 SINAMICS V90 輸入電壓： 200-240 V 1 相/三相交流 - 15 %/+ 10 % 5.0 A/3.0 A 45-66 輸出電壓：0 – 輸出 2.6 A 0-330 Hz 電機：0.4 kW 防護等級：IP20 尺寸 B， 55x170x170（寬x高x深） |
| |||||
| 組態 | |||||||
 | 6SL3210-5FB10-4UF1 SINAMICS V90，含 PROFINET 輸入電壓： 200-240 V 1 相/三相交流 - 15 %/+ 10 % 5.0 A/3.0 A 45-66 輸出電壓：0 – 輸出 2.6 A 0-330 Hz 電機：0.4 kW 防護等級：IP20 尺寸 B， 55x170x170（寬x高x深） |
| |||||
| 組態 | |||||||
 | 6SL3210-5FB10-8UA0 SINAMICS V90 輸入電壓： 200-240 V 1 相/三相交流 -15 %/+10 % 10.4 A/5.0 A 45-66 輸出電壓：0 – 輸出 4.7 A 0-330 Hz 電機：0.75 kW 防護等級：IP20 尺寸 C， 80x170x195（寬x高x深） |
| |||||
| 組態 | |||||||
 | 6SL3210-5FB10-8UF0 SINAMICS V90，含 PROFINET 輸入電壓： 200-240 V 1 相/三相交流 -15 %/+10 % 10.4 A/5.0 A 45-66 輸出電壓：0 – 輸出 4.7 A 0-330 Hz 電機：0.75 kW 防護等級：IP20 尺寸 C， 80x170x195（寬x高x深） |
| |||||
| 組態 | |||||||
| 6SL3210-5FB11-0UA1 SINAMICS V90 輸入電壓：200-240 V 3-P - 15 %/+ 10 % 7.0 A 45-66 Hz 輸出電壓：0 – 輸出 6.3 A 0-330 Hz 電機：1 kW 防護等級：IP20 尺寸 D， 95x170x195（寬x高x深） |
| |||||
| 組態 | |||||||
 | 6SL3210-5FB11-0UF1 SINAMICS V90，含 PROFINET 輸入電壓：200-240 V 3-P - 15 %/+ 10 % 7.0 A 45-66 Hz 輸出電壓：0 – 輸出 6.3 A 0-330 Hz 電機：1 kW 防護等級：IP20 尺寸 D， 95x170x195（寬x高x深） |
| |||||
SINAMICS V90 - optimized servo drive solution for motion control applications SINAMICS V90 servo drive, 200 ... 240 V 1 AC/3 AC, frame sizes FSA, FSB, FSC and FSD SINAMICS V90 servo drive, 380 ... 480 V 3 AC, frame sizes FSAA, FSA, FSB and FSC SINAMICS V90 servo drive SINAMICS V90 can be integrated into a wide range of applications, either using the pulse train version (pulse/direction, analog, USS/Modbus RTU) or the PROFINET version. The SINAMICS V90 pulse train version features internal positioning, positioning with pulse train as well as speed and torque control modes. The SINAMICS V90 PROFINET version supports PROFINET for linking the drive to an automation system via PROFIdrive profile. With integrated real-time auto tuning and automatic suppression of machine resonances, the system automatically optimizes itself to achieve high dynamic performance and smooth operation. For Selection and Ordering Data please refer to section "System overview" "SINAMICS V90 basic servo drive system" from page 1/10. ■Benefits Optimized servo performance • Advanced one-button tuning and real-time auto tuning enable machines to achieve a high dynamic performance • Automatic suppression of machine resonances • 1 MHz high-frequency pulse train input • Different encoder types to address the requirements of your applications Cost-effective • Integrated control modes: Pulse train positioning, internal positioning with traversing block or Modbus, speed and torque control modes • Integrated internal positioning function • Integrated braking resistor in all frame sizes with max. motor power ? 0.2 kW • Integrated holding brake switch (for the 400 V version), no external relay necessary Easy to use • Simple connection to a control system • Easy, all from a single source • Easy servo tuning • Easy machine optimization • Easymissioning with SINAMICS V-ASSISTANT • Parameter cloning • Easy integration via PTI, PROFINET, USS, Modbus RTU Reliable operation • High-quality motor bearings • All motors have IP65 degree of protection and are equipped with oil seal • Integrated safe torque off (STO)
Selection and ordering data Detailed information on SINAMICS V90 is available on the Internet at: .siemens.co/sinamics-v90 In addition, the Drive Technology Configurator (DT Configurator) can be used on the Internet: .siemens.co/dt-configurator SIMOTICS S-1FL6 servomotors ? Configuration with SINAMICS V90 servo drive Further info in section SIMOTICS S-1FL6 servomotors. Max. speed Rated power 1) Static torque Rated torque 1) Max. torque 1) Rated current Max. current Torque constant Moment of inertia of rotor Recmended load to motor inertia ratio, max. Weight 2) nmax. Prated at ?T=100 K M0 at ?T=100 K Mrated at ?T=100 K Mmax Irated at ?T=100 K Imax Jwithout brake Jwith brake mwithout brake mwith brake rpm kW (hp) Nm Nm Nm A A Article No. Nm/A 10-4 kgm2 kg kg SIMOTICS S-1FL6 Low Inertia servomotors – High dynamic performance Shaft height 20 – Rated speed nrated 3000 rpm 5000 0.05 (0.07) 0.16 0.16 0.48 1.2 3.6 1FL6022-2AF21-1 ■ ■ 1 0.14 0.031 0.038 30× 0.47 0.7 5000 0.10 (0.14) 0.32 0.32 0.96 1.2 3.6 1FL6024-2AF21-1 ■ ■ 1 0.29 0.052 0.059 30× 0.63 0.86 Shaft height 30 – Rated speed nrated 3000 rpm 5000 0.20 (0.27) 0.64 0.64 1.91 1.4 4.2 1FL6032-2AF21-1 ■ ■ 1 0.48 0.214 0.245 30× 1.02 1.48 5000 0.40 (0.54) 1.27 1.27 3.82 2.6 7.8 1FL6034-2AF21-1 ■ ■ 1 0.49 0.351 0.381 30× 1.46 1.92 Shaft height 40 – Rated speed nrated 3000 rpm 5000 0.75 (1.02) 2.39 2.39 7.2 4.7 14.2 1FL6042-2AF21-1 ■ ■ 1 0.51 0.897 1.06 20× 2.8 3.68 Shaft height 40 – Rated speed nrated 3000 rpm 5000 1.00 (1.36) 3.18 3.18 9.54 6.3 18.9 1FL6044-2AF21-1 ■ ■ 1 0.51 1.15 1.31 20× 3.39 4.2 Shaft height 50 – Rated speed nrated 3000 rpm 5000 1.50 (2.04) 4.78 4.78 14.3 10.6 31.8 1FL6052-2AF21-2 ■ ■ 1 0.46 2.04 2.24 15× 5.45 6.96 5000 2.00 (2.72) 6.37 6.37 19.1 11.6 34.8 1FL6054-2AF21-2 ■ ■ 1 0.55 2.62 2.82 6.66 8.2 SIMOTICS S-1FL6 High Inertia servomotors – Smooth operational performance Shaft height 45 – Rated speed nrated 3000 rpm 4000 0.4 (0.54) 1.9 1.27 3.8 1.2 3.6 1FL6042-1AF61-2 ■ ■ 1 1.1 2.7 3.2 10× 3.4 4.8 4000 0.75 (1.02) 3.5 2.39 7.2 2.1 6.3 1FL6044-1AF61-2 ■ ■ 1 1.2 5.2 5.7 5.2 6.6 Shaft height 65 – Rated speed nrated 2000 rpm 3000 0.75 (1.02) 4 3.58 10.7 2.5 7.5 1FL6061-1AC61-2 ■ ■ 1 1.5 8 9.1 5× 5.7 8.8 3000 1 (1.36) 6 4.78 14.3 3 9 1FL6062-1AC61-2 ■ ■ 1 1.7 11.7 13.5 7 10.1 3000 1.5 (2.04) 8 7.16 21.5 4.6 13.8 1FL6064-1AC61-2 ■ ■ 1 1.6 15.3 16.4 8.4 11.5 3000 1.75 (2.38) 11 8.36 25.1 5.3 15.9 1FL6066-1AC61-2 ■ ■ 1 1.7 22.6 23.7 11.1 14.2 3000 2 (2.72) 15 9.55 28.7 5.9 17.7 1FL6067-1AC61-2 ■ ■ 1 1.7 29.9 31 13.7 16.8 Shaft height 90 – Rated speed nrated 2000 rpm 3000 2.5 (3.40) 15 11.9 35.7 7.8 23.4 1FL6090-1AC61-2 ■ ■ 1 1.6 47.4 56.3 5× 15.4 21.5 3000 3.5 (4.76) 22 16.7 50 11 33 1FL6092-1AC61-2 ■ ■ 1 1.6 69.1 77.9 19.8 25.9 2500 5 (6.80) 30 23.9 70 12.6 36.9 1FL6094-1AC61-2 ■ ■ 1 2.0 90.8 99.7 24.4 30.5 2000 7 (9.52) 40 33.4 90 13.2 35.6 1FL6096-1AC61-2 ■ ■ 1 2.7 134.3 143.2 33.3 39.3 Encoder type Incremental encoder TTL, 2500 S/R A Absolute encoder 20-bit single-turn + 12-bit multi-turn * L 1FL6 Low Inertia: Absolute encoder 21-bit single-turn M Shaft extension Holding brake Feather key Without A Feather key With B Plain shaft Without G Plain shaft With H * Absolute encoder 20-bit single-turn + 12-bit multi-turn are available for 1FL6 Low Inertia from the second half of the 2019 calendar year. 1) Rated torque, rated power and maximum torque listed in the table above allow for a production tolerance of 10 %. 2) Motor weight with incremental encoder. 6SL3255-0AA00-A0 Clicking to the Industry Mall © Siemens 2019 Siemens D 33 · May 2019 1/11 System overview SINAMICS V90 basic servo drive system 1 SINAMICS V90 servo drive Further info in section SINAMICS V90 servo drive. Line filter Recommended standard fuse Recommended circuit breaker Max. motor power Frame size With one of the recommended line filters, EN 61008-3 category C2 can be reached in combination with SINAMICS V90. For more information please refer to SINAMICS V90 Operating instructions. corresponding to IEC standard corresponding to UL standard corresponding to IEC standard/ UL standard Line supply voltage Irated Irated Irated Class kW (hp) Article No. V A Article No. A Article No. A Article No. SINAMICS V90 servo drive Line supply 200 ... 240 V 1 AC/3 AC 0.10 (0.14) 6SL3210-5FB10-1U ■ 2 FSA 200 ... 240 1 AC 18 6SL3203-0BB21-8VA0 6 3NA3801 6 Listed JDDZ 3RV2011-1EA10 200 ... 240 3 AC 5 6SL3203-0BE15-0VA0 200 ... 240 1 AC 18 6SL3203-0BB21-8VA0 200 ... 240 3 AC 5 6SL3203-0BE15-0VA0 Line supply 200 ... 240 V 1 AC/3 AC 0.20 (0.27) 6SL3210-5FB10-2U ■ 2 FSA 200 ... 240 1 AC 18 6SL3203-0BB21-8VA0 6 3NA3801 6 Listed JDDZ 3RV2011-1EA10 200 ... 240 3 AC 5 6SL3203-0BE15-0VA0 0.40 (0.54) 6SL3210-5FB10-4U ■ 1 FSB 200 ... 240 1 AC 18 6SL3203-0BB21-8VA0 10 3NA3803 10 3RV2011-1HA10 200 ... 240 3 AC 5 6SL3203-0BE15-0VA0 3RV2011-1EA10 Line supply 200 ... 240 V 1 AC/3 AC 0.75 (1.02) 6SL3210-5FB10-8U ■ 0 FSC 200 ... 240 1 AC 18 6SL3203-0BB21-8VA0 16 3NA3805 20 Listed JDDZ 3RV2011-1KA10 200 ... 240 3 AC 5 6SL3203-0BE15-0VA0 3RV2011-1HA10 Line supply 200 ... 240 V 3 AC 1.00 (1.36) 6SL3210-5FB11-0U ■ 1 FSD 200 ... 240 3 AC 12 6SL3203-0BE21-2VA0 16 3NA3805 20 Listed JDDZ 3RV2011-1JA10 Line supply 200 ... 240 V 3 AC 1.50 (2.04) 6SL3210-5FB11-5U ■ 0 FSD 200 ... 240 3 AC 12 6SL3203-0BE21-2VA0 25 3NA3810 25 Listed JDDZ 3RV2011-4AA10 2.00 (2.72) 6SL3210-5FB12-0U ■ 0 SINAMICS V90 servo drive Line supply 380 ... 480 V 3 AC 0.4 (0.54) 6SL3210-5FE10-4U ■ 0 FSAA 380 ... 480 3 AC 5 6SL3203-0BE15-0VA0 6 3NA3801-6 10 Listed JDDZ 3RV2021-1DA10 0.75 (1.02) 6SL3210-5FE10-8U ■ 0 FSA 3RV2021-1EA10 Line supply 380 ... 480 V 3 AC 1 (1.36) 6SL3210-5FE11-0U ■ 0 FSA 380 ... 480 3 AC 5 6SL3203-0BE15-0VA0 10 3NA3803-6 10 Listed JDDZ 3RV2021-1FA10 1.75 (2.38) 6SL3210-5FE11-5U ■ 0 FSB 12 6SL3203-0BE21-2VA0 15 3RV2021-1HA10 2.5 (3.40) 6SL3210-5FE12-0U ■ 0 16 3NA3805-6 3RV2021-4AA10 Line supply 380 ... 480 V 3 AC 2.5 (3.40) 6SL3210-5FE12-0U ■ 0 FSB 380 ... 480 3 AC 12 6SL3203-0BE21-2VA0 16 3NA3805-6 15 Listed JDDZ 3RV2021-4AA10 3.5 (4.76) 6SL3210-5FE13-5U ■ 0 FSC 20 6SL3203-0BE22-0VA0 20 3NA3807-6 25 3RV2021-4BA10 5 (6.80) 6SL3210-5FE15-0U ■ 0 7 (9.52) 6SL3210-5FE17-0U ■ 0 25 3NA3810-6 3RV2021-4DA10
Integration in automation
Totally Integrated Automation and cmmunication
SINAMICS is an integral cmponent of the Siemens "Totally Integrated Automation" concept. Integrated SINAMICS systems covering configuration, data storage, and cmmunication at automation level ensure low-maintenance solutions with the SIMATIC, SIMOTION and SINUMERIK control systems.
Depending on the application, the appropriate variable frequency drives can be selected and incorporated in the automation concept. With this in mind, the drives are clearly subdivided into their different applications. A wide range of cmmunication options (depending on the drive type) are available for establishing a cmmunication link to the automation system:
- PROFINET
- PROFIBUS
- EtherNet/IP
- Modbus TCP
- Modbus RTU
- AS-Interface
- BACnet MS/TP
Applications
SINAMICS is the cmprehensive family of drives from Siemens designed for machine and plant engineering applications. SINAMICS offers solutions for all drive tasks:
- Simple pump and fan applications in the process industry
- Demanding single drives in centrifuges, presses, extruders, elevators, as well as conveyor and transport systems
- Drive line-ups in textile, plastic film, and paper machines as well as in rolling mill plants
- Highly dynamic servo drives for machine tools, as well as packaging and printing machines
SINAMICS as part of the Siemens modular automation system
Innovative, energy-efficient and reliable drive systems and applications as well as services for the entire drive train
The solutions for drive technology place great emphasis on the highest productivity, energy efficiency and reliability for all torque ranges, performance and voltage classes.
Siemens offers not only the right innovative variable frequency drive for every drive application, but also a wide range of energy-efficient low-voltage motors, geared motors, explosion-protected motors and high-voltage motors for cmbination with SINAMICS.
Furthermore, Siemens supports its customers with global pre-sales and after-sales services, with over 295 service points in 130 countries – and with special services e.g. application consulting or motion control solutions.
Energy efficiency
Energy management process
Efficient energy management consultancy identifies the energy flows, determines the potential for making savings and implements them with focused activities.
Almost two thirds of the industrial power requirement is from electric motors. This makes it all the more important to use drive technology permitting energy consumption to be reduced effectively even in the configuration phase, and consequently to optimize plant availability and process stability. With SINAMICS, Siemens offers powerful energy efficient solutions which, depending on the application, enable a significant reduction in electricity costs.
Up to 70 % potential for savings using variable-speed operation
SINAMICS enables great potential for savings to be realized by controlling the motor speed. In particular, huge potential savings can be recovered from pumps, fans and cmpressors which are operated with mechanical throttle and valves. Here, changing to variable-speed drives brings enormous economic advantages. In contrast to mechanical control systems, the power consumption at partial load operation is always immediately adjusted to the demand at that time. So energy is no longer wasted, permitting savings of up to 60 % – in exceptional cases even up to 70 %. Variable-speed drives also offer clear advantages over mechanical control systems when it comes to maintenance and repair. Current spikes when starting up the motor and strong torque surges become things of the past – and the same goes for pressure waves in pipelines, cavitation or vibrations which cause sustainable damage to the plant. Smooth starting and ramp-down relieve the load on the mechanical system, ensuring a significantly longer service life of the entire drive train.
Regenerative feedback of braking energy
In conventional drive systems, the energy produced during braking is converted to heat using braking resistors. Energy produced during braking is efficiently recovered to the supply system by versions of SINAMICS G and SINAMICS S drives with regenerative feedback capability and these devices do not therefore need a braking resistor. This permits up to 60 % of the energy requirement to be saved, e.g. in lifting applications. Energy which can be reused at other locations on a machine. Furthermore, this reduced power loss simplifies the cooling of the system, enabling a more cmpact design.
Energy transparency in all configuration phases
Early on, in the configuration phase, the SIZER for Siemens Drives engineering tool provides information on the specific energy requirement. The energy consumption across the entire drive train is visualized and cmpared with different plant concepts.
SINAMICS in cmbination with energy-saving motors
Engineering integration stretches beyond the SINAMICS drive family to higher-level automation systems, and to a broad spectrum of energy-efficient motors with a wide range of performance classes, which, cmpared to previous motors, are able to demonstrate up to 10 % greater efficiency.
Variants
Depending on the application, the SINAMICS range offers the ideal variant for any drive task.
Platform concept
All SINAMICS variants are based on a platform concept. Joint hardware and software cmponents, as well as standardized tools for dimensioning, configuration, and cmmissioning tasks ensure high-level integration across all cmponents. SINAMICS handles a wide variety of drive tasks with no system gaps. The different SINAMICS variants can be easily cmbined with each other.
Quality management according to EN ISO 9001
SINAMICS conforms to the most exacting quality requirements. Cmprehensive quality assurance measures in all development and production processes ensure a consistently high level of quality.
Of course, our quality management system is certified by an independent authority in accordance with EN ISO 9001.
IDS – Integration at its very best
The Siemens Integrated Drive Systems (IDS) solution offers perfectly matched drive cmponents with which you can meet your requirements. The drive cmponents reveal their true strengths as an Integrated Drive System over the full range from engineering and commissioning through to operation: Integrated system configuration is performed using the Drive Technology Configurator: Just select a motor and a converter and design them with the SIZER for Siemens Drives engineering tool. The STARTER and SINAMICS Startdrive commissioning tools integrate the motor data and at the same time simplify efficient commissioning. Integrated Drive Systems are incorporated in the TIA Portal – this simplifies engineering, commissioning and diagnostics.
