AC WITHSTAND VOLTAGE
MODEL	7130	7132	7140	7142
Output Rating	5KVAC/20mA
Output Rating	Range	Resolution	Accuracy
Output Voltage, KVAC	0-5.00	0.01	±（2% of setting + 5V）
Output Frequency	50Hz/60Hz ±100ppm, User Selection
Output Waveform	Sine Wave ,THD.<2% （Resistive Load）, Crest Factor = 1.3 - 1.5
Output Regulation	± （1% of output + 5V）, From no load to full load
SETTINGS
Max-Limit AC Current, mA	0 - 20.00	0.01	±（2% of setting + 2counts）
Min-Limit AC Current, mA	0 - 9.999	0.001	±（2% of setting + 2counts）
Ramp Up Time, second	0.1 - 999.9	0.1	±（0.1% + 0.05sec）
Ramp Down Time, second	0 - 999.9	0.1
Dwell Time, second	0, 0.3 - 999.9 （0=continuous）	0.1
Arc Detection	0, 1 - 9 ranges （0=OFF, 9 is the most sensitivity）
DC WITHSTAND VOLTAGE （7140,7142 ONLY）
Output Rating	6KVDC/7500µA
Output Voltage, KVDC	0 - 6.00	0.01	±（2% of setting + 5V）
Output Ripple	< 5%（6KV/7500µA at Resistive Load）
SETTINGS
Max-Limit DC Current, µA	0 - 7500	1	±（2% of setting + 2counts）
Min-Limit DC Current, µA	0 - 999.9	0.1	±（2% of setting + 2counts）
Ramp Up Time, second	0.1 - 999.9	0.1	±（0.1% + 0.05sec）
Ramp Down Time, second	0, 1.0 - 999.9	0.1
Dwell Time, second	0, 0.4 - 999.9（0=continuous）	0.1
Arc Detection	0, 1 - 9 ranges （0=OFF, 9 is the most sensitivity）
Discharge Time	≦ 200 msec
INSULATION RESISTANCE （7132,7142 ONLY）
Output Rating	1KVDC/9999MΩ
Output Voltage, DCV	30 - 1000	10	±（2% of setting + 5V）
SETTINGS
Max-Limit Resistance, MΩ	0, 1 - 9999 （0=OFF）	1	±（2% of setting+2counts）at 500-1000VDC,1 -1000 MΩ
Min-Limit Resistance, MΩ	1 - 9999	1	±（5% of setting+2counts）at 500-1000VDC,1000 -9999 MΩ
Min-Limit Resistance, MΩ	1 - 9999	1	±（8% of setting+2counts）at 30-500VDC, 1 -1000 MΩ
Ramp Up Time, second	0.1 - 999.9	0.1	±（0.1% + 0.05sec）
Ramp Down Time, second	0, 1.0 - 999.9	0.1
Delay Time, second	0, 0.5 - 999.9（0=continuous）	0.1
MEASUREMENT
AC/DC Voltage, KV	0 - 6.00	0.01	±（1.5% of reading + 1count）
DC Voltage, V （IR only）	30 - 1000	1	±（1.5% of reading + 5V）
AC Current, mA	0 - 3.500	0.001	±（2% of reading + 2counts）
AC Current, mA	3.00 - 20.00	0.01	±（2% of reading + 2counts）
DC Current, µA	0 - 350.0	0.1	±（2% of reading + 2counts）
DC Current, mA	0.300 - 3.500	0.001
DC Current, mA	3.00 - 7.50	0.01
Resistance, , MΩ	1 - 9999 （Auto Range）	0.001 0.01 0.1 1	±（2% of setting+2counts）at 500-1000VDC, 1 -1000 MΩ ±（5% of setting+2counts）at 500-1000VDC, 1000 -9999 MΩ ±（8% of setting+2counts）at 30-500VDC, 1 -1000 MΩ
GENERAL
Input Voltage AC	115/230Vac±15%, 50/60Hz ± 5%, Fuse 3.1
PLC Remote Control	Input : Test , Reset , Memory1.2.3 , Interlock
PLC Remote Control	Output : Pass , Fail , Processing , Reset-Out
Interface（Option）	RS485 Interface
Memory	10 memories, 3 steps/memory
Graphic Display	128×64 Graphic LCD
Safety	Built-in Smart GFI circuit,GFI trip current 450?A max, HV shut down speed: <1mS
Key Lock	To prevent unauthorized alteration of the test Parameters
Calibration	Build-in software and external calibrated meters
Verification	Build-in software driven verification menu to test fault detection circuits
Alarm Volume Setting	Range: 0-9 ;0=OFF, 1 is softest volume, 9 is loudest volume.
Environment	0-40℃, 20-80%RH
Dimension/Net Weight	215mm（W）×89mm（H）×370mm（D）/ 10Kg
STANDARD ACCESSORIES
Power Cord（10A）	×1
Fuses	×2 （Including a spare contained in the fuse holder）
Interlock Disable Key（1505）	×1
Hipot Test Lead ,1.5m（1101）	×1
Hipot Return Lead ,1.8m（1102）	×1
*product specifications are subject to change without notice.

狠狠色丁香久久综合婷婷亚洲成人福利在线-欧美日韩在线观看免费-国产99久久久久久免费看-国产欧美在线一区二区三区-欧美精品一区二区三区免费观看-国内精品99亚洲免费高清

EXTECH7100系列耐壓絕緣測(cè)試儀

EXTECH7130/7140/7142耐壓絕緣測(cè)試儀

會(huì)員登錄

收藏該商鋪

提示